We provide servicing, leak testing and flow testing of all different types of vehicle fuel injectors to ensure their peak performance by simulating the exact operational characteristics at different rpm on an injector test bench. Fuel injectors are serviced in an external ultrasonic bath for optimal cleaning and guaranteed performance.
Book NowPolishing and wet sanding old or faded headlights to remove oxidation and restore to factory condition to ensure maximum visibility and safe driving.
Book NowA perfect exterior shine is created by protecting the paint, covering minor scratches and paint chips, slowing down the corrosion. Recommended at least once or preferably twice a year.
Book NowHighly effective dent pulling system for steel and aluminium (latest model vehicles) to pull out dents (door, bonnet, quarter panels, trunk, roof) without the removal of interior trim of doors, trunk etc. This prevents staining of interior trim and disconnection of any electrical components. Inverter plasma cutter utilized for cutting and replacement of A,B, or C pillars for major body damage.
Book NowVehicle frame and subframe straightening utilizing a hydraulic bench assembly for precise pulling and alignment of chassis as per manufacturer specification.
Book NowCustomized paint booth with dual filtration structure at 98 % filtration rate (primary filter, ceiling filter, fibre glass floor filter). 15kw turbine fans for maximum air volume and airflow to ensure a premium paint finish eliminating paint pinholes and overspray. Heavy duty burner for a prompt baking time at a maximum temperature of 80 degrees Celsius. Accommodates all passenger cars, 4×4 and light commercial high roof buses.
Book NowHydraulic washing lifts used to raise the entire vehicle (passenger car, 4×4, light commercial vehicle) for a thorough high-pressure wash, including under carriage washing utilizing high-pressure vertical pumps.
Book NowUtilizing the state of the art Hunter HawkEye Elite® computerized wheel alignment system. This wheel aligner uses four precision cameras to measure the position and orientation of targets mounted to each wheel using Hunter’s patented QuickGrip™ adapters. QuickGrip adapters feature spring-loaded arms that grip the tire, eliminating metal-to-metal contact and subsequent rim damage on expensive wheels. The HawkEye Elite® wheel alignment system takes just 90-seconds to chock the wheels for safety, raise the lift to work height, mount targets, set air pressure and roll forward to compensate sensors. Once this procedure is complete the results are printed automatically. That is less than two (2) minutes for an extremely accurate complete four (4) wheel alignment reading.
Book NowHunter touchscreen wheel balancer utilizing smart spoke with smart weight balancing technology which improves balance and minimizes weight usage for steel/alloy wheels. This machine is capable of balancing wheels up to 30 inches – passenger cars, 4×4, light duty vehicles and commercial buses.
Book NowRobinair computerized R134a A/C recovery/recycling station for system performance test, recover, recharge and vacuum of all A/C systems for passenger vehicles, 4×4 and commercial buses. System leak test is performed by automatic dye injection and testing with a UV light. Electrical leak detection is also utilized. Refrigerant capacity and oil injection specification are directly input by the technician from the software embedded in the machine, as per manufacturer specifications.
Book NowComplete transmission system mechanical and electrical checks utilizing the updated scan tool for sensor/solenoid actuation, fault code testing and transmission control module re-set / re-program. Routine transmission drain and refill, ATF filter change and valve body test, remove, service or replace, as required.
Book NowDiagnose short circuits, open circuits, no power feed in electrical systems utilizing the most modern digital volt ohmmeter, test lights and battery/charging system load tester.
Book NowEngine performance, fault code diagnosis utilizing the most up to date scan tools with bi-directional capabilities (Snap on, iscan 2 wt, Gscan 2), for engine sensor/component range testing with live data stream and graphing multimeter. Key programming, module re-learn, system reset and programming features offered for all vehicles. Oscilloscope used to observe glitches/sensor waveform comparison to factory specific waveform in ignition primary and/or secondary for intermittent ignition misfire diagnosis.
Book NowAny engine with low compression may be overhauled using OEM parts to bring it back to standard service specification. A 6 months warranty is included, as per terms and conditions. Engines that are beyond repair (excessive wear) must be replaced entirely with a short block unit for years of trouble free service.
Book NowSuspension system inspect and replace as required to ensure peak operation of all components; hence ensuring the safety of all passenger’s and a smooth ride.
Regular inspection of steering components and replacement if required is vital for safe operation of the vehicle and to avoid premature wear of the tires, which may lead to on road failure posing a safety hazard to all. Book NowReplace brake pads with OEM quality to prevent premature wear/noise and brake fade. Resurfacing of brake discs to ensure no pedal pulsation resulting in a smooth and firm brake grip. Replenishing of brake fluid at manufacturer recommended intervals to ensure a moisture free system, without contaminants. This prevents seal leakage and premature brake component failure.
Book NowHunter brake lathe utilized for speed and precision. This latest in the industry lathe enables us to resurface brake rotors (discs) up to 23” in diameter and brake drums up to 28” in diameter giving us the ability to service a wide variety of passenger and light commercial vehicles.
Book NowReplace oil and filters with OEM specification to ensure maximum longevity and engine performance.
Book NowReplace oil filter with OEM and replenish engine oil with manufacturer recommended viscosity engine oil.
Book Now